Enamel Plus HFO dentine D3 5 g

ChARACTERISTICS • Highly Biocompatible, does not contain Co-monomers nor Bis-GMA • Similar abrasion to natural enamel • Mechanical and functional characteristics similar to gold • Ideal polishability and high gloss retention over time • Ideal handling: it does not stick to the instrument • Excellent sculptibility • Suitable for direct and indirect technique • High Radiopacity • Contains Fluoride
Manufacturer: Micerium

Completely biocompatible to guarantee a perfect integration in harmony with the human body without releasing any toxic substances. High stability resin matrix and absence of nanoparticles in the powders generated by abrasion phenomenon that could be absorbed by the body. The UDMA and TCDDMDMA innovative formula is Bis-GMA free, monomer that can liberate Bisphenol-A (BPA), an organic compound that exhibits estrogenic properties in human body causing health problems. ABRASION Natural enamel DEPTH 0.2167(0.070),VOLUME 0.404/(0.200) Gold type III DEPTH 0.219/(0.060), VOLUME 0.328/(0.140) Composite F* (enamel)light cured with Laborlux** DEPTH 0.459/(0.068),VOLUME 1.017/(0.239) Composite F* ( enamel)light cured with Led DEPTH 0.464/(0.069),VOLUME 0.972,(0.247) Enamel plus HRi Biofunction light cured with Led DEPTH 0.252/(0.059),VOLUME 0.454/(0.057) Enamel plus HRi Biofunction light cured with Laborlux** DEPTH 0.212/(0.052)VOLUME 0.375,(0.052) * reference composite chosen after identified as the best among the ones tested during the preliminary phase ** curing unit for laboratory; it cures with heat (ca 70°C). PHYSICAL DATA Vickers Hardness 685 MPa Flexural Strength 150 MPa Modulus of elasticity 11.600 MPa Compressive Strength 460 MPa Physical data maintained till 4 mm of depth with (minimum power 1000 mW) LED light curing unit.